In what manner should I adjust my Scotts Edgeguard Spreader? Adjusting the spreader’s setting determines how quickly fertilizer is distributed throughout the yard. Scott Edgeguard spreader setting denotes the required application method and product when using the guarantee.
Proper spreading is essential for maximum efficiency. We’ll go through the Scotts Edgeguard spreader’s configuration options today.
Table of Contents
How to Adjust Your Scotts Edgeguard Spreader to the Ideal Position
The Scotts Edgeguard is the ideal option for streamlined landscaping and channeling projects. Though, productive utilization requires some expertise. You can’t just throw your goods wherever and expect it to do well. That’s why it’s important to learn how to adjust a spreader properly. The Scotts Edgeguard Spreader has a designated application area for each product. The Scotts Edgeguard Spreader: How to Use It. Using the setting chart is easy.
Please see below the recommended adjustments for the Scotts Edgeguard Spreader while applying lime, grass seed, or fertilizer.
Spreading Grass Seed with a Scotts Edgeguard Spreader
| Concern | New Seeding | Overseeding |
| Tall Fescue Mix | 18 | 9 1/2 |
| Sun and Shade Mix | 12 1/2 | 8 1/2 |
| Rye Mix | 15 | 9 1/2 |
Using the above table, you can determine what settings work best for your Scotts Edgeguard Mini. Other Scotts Edgeguard Spreaders will work with a little tweaking to the settings. Tall Fescue Mix is most effective when put to a depth of 18 when newly seeded.
On contrast, the recommended setting for Tall fescue in the Scotts Edgeguard DLX Spreader’s overseeding chart is 9 12. If your lawn is particularly large, we suggest increasing to 10. However, 9 12 can get the job done efficiently and without hitches.
For overseeding purposes, the optimal sun/shade ratio is 8 12. If your garden is significantly bigger, you can even use nine or a half. Use 12 or 12 12 for establishing a new lawn. With these parameters, you’ll see the best results. Stay within the range we advise, otherwise you risk running out of product prematurely or being left with leftovers. They’re hardly the best result either way.
When first sowing your garden with Rye Mix, use 15. Again, the recommended setting according to Scotts Edgeguard Mini Spreader’s conversion chart for overseeding is 9 12. But you can play about with it and use 9 or 10 if it works better for your lawn.
Optimal Lime Spreading Settings for the Scotts Edgeguard Spreader
| Concern | Rate Of Application | Setting |
| Initial | 40 Lbs/ 1000 SF | 7/8 |
| Maintenance | 20 Lbs/ 1000 SF | 2/3 |
Spreading Lime pellets on the ground to adjust its Ph level requires careful application and monitoring. There is a risk of altering the soil’s ph balance if too much lime is applied. On the other side, it will take a very long time for the pH to drop to one if too little lime is used.
Make careful to utilize the 7 or 8 sets of lime pellets when applying 40 pounds per 1,000 square feet. It will take longer to regulate the pH if you use less than seven, and you’ll do irreparable harm to the soil if you use more than eight. Meanwhile, for upkeep, use 20 lb. per 1,000 square feet on a 2 or 3 setting. Make sure you don’t go too far while keeping the pellets at their current level. If you have a Scotts Edeguard Spreader, this is the optimal setting for it to perform at.
Fertilizer Spreader Settings for a Scotts Edgeguard
| Concern | Setting |
| Crabgrass Preventer | 4.5 |
| Lawn Food | 5 |
| Weed Control | 4.5 |
When spreading fertilizer, the Scott Edgeguard Spreader typically has a single, universal setting that can be adjusted slightly for different types of furniture. Use a setting of 4.5 or 4 on the spreader if you want to use the crabgrass preventer. However, the best results from applying the fertilizer occur at a pH level of 4.5. When utilized on a per 1000 SF basis, this value is appropriate. Keep in mind that you should employ 40 Lbs while employing 4.5.
We recommend a level 5 Lawn Food setting. At 5, your lawn will be at its most productive, and any crops or plants you plant will thrive. You could also use 4.5, but anything below 3 or beyond 5 is probably pushing it. This is true for the DLX and the Mini, both of which are made by Scotts Edgeguard.
Finally, it acts similarly to a crabgrass preventer in terms of weed management. For 40 lb. per 1000 sq. ft., use the 4.5 setting. Use 5.5 for 60 lbs, however use only 60 lbs if your lawn is more than 1500 square feet. It could cause physical harm to your property if left unchecked.
You Can Learn a Lot from this Video!
FAQs
How do I adjust Scott’s spreader?
It’s up to you and your goals. The ideal pH range for fertilizer use is between 4.5 and 5. However, a completely different environment is necessary for when planting seeds or spreading lime pellets.
Scotts Edgeguard: what’s the best setting for grass seed?
Choosing the right grass seed is the first step. If you wish to utilize the Rye mixture, you’ll need 15 pounds for a brand-new lawn. Overseeding requires a pH of 9.5, so keep that in mind.
Conclusion
To get the most out of your spreader, you need to utilize the correct setting. It’s important to use the right settings, as else the product won’t function properly. So, it might potentially destroy your landscape. The following is a chart illustrating the various settings available on the Scotts Edgeguard Spreader, including those for spreading lime pellets, grass seed, and fertilizer.
If you want the best grass possible, use the recommended parameters. Be wary, as using the incorrect settings can do irreparable damage to your garden. The given chart is only for use with a Scotts Edgeguard. Various model dispersal systems have varying configuration options.
